FDG Seismic Vinylester Chemical Injection Anchor Adhesive – H200+FC
FDG H200+FC is a top-performance ‘new generation polymer’ anchoring system with very low VOC content offering very high performance in both cracked & uncracked concrete, along with a very good performance under seismic conditions (C1 & C2). FDG H200+FC is one of the most versatile anchoring systems in the market.
FDG H200+FC has “fast cure” properties and mixes blue and fades to grey indicating the open working time.
Features and Benefits:
- Blue to grey colour change technology
- Anchors may be placed close to free edges
- Suitable for dry, wet & flooded holes
- Reduced drilling diameters i.e. M20 only requires a 22mm hole and M24 requires only a 26mm hole making it an economical injection system
- Variable embedment depths
- Available in 300ml single piston foil pack cartridges
- Ratio of 10:1.
Typical Applications:
- Structural applications in cracked and uncracked concrete
- Applications where higher seismic resistance is required (C1 & C2)
- Reinforcing & starter bars
- Suspended ventilation systems
- Safety barriers
- Machinery & heavy machinery
- Racking
- Rolling cranes
Engineering Data
Rebar
(Includes ETA Approval)
Threaded rod
(Includes ETA Approval)
Factory Certificates
ETA 23/0564 & ETA 23/0565
Safety Data Sheets
Date of compilation: 09/05/2023
Approvals:
- ETA according to EAD
33049-00-0601 (Option 1: Cracked & Uncracked Concrete) - Seismic C1 & C2
- ETA according to EAD
330087-00-0601 (TR023: Rebar Connections) - 100 years working life
- NSF/ANSI 61 (Potable Water Contact)